? 221 west industry court deer park, ny 11729 (631) 586 7600, fax (631) 242 9798 ? ? world wide web - www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data data sheet 1073, rev. ? formerly shd51910 positive adjustable 1.5 amp regulator features: ? isolated hermetic package ? similar to industry type lm117 ? add suffix ?s? for s-100 screening maximum ratings all ratings are at t a = 25 c unless otherwise specified. parameter conditions typical limit units output current i out - - 1.5 a input to output voltage differential - - 40 vdc storage temperature range - - -65 to +150 c lead temperature soldering, 10 seconds - +300 c power dissipation (p d ) - - internally limited w maximum thermal resistance junction to case ( jc ) - - 3.5 c/w junction temp. (t j ) - - +150 c ambient operating temperature range (t a ) recommended conditions - -55 to +125 c electrical characteristics parameter conditions min typ. limit units reference voltage 3.0v v in - v out 40v 10 ma i out i max p p max t a = +25 c 1.225 1.250 1.270 v line regulation 3.0v v in - v out 40v i out = 10ma - .01 0.02 %/v load regulation 10ma i out i max - 0.3 1.0 mv% adjust pin current - - 50 100 a adjust pin current change 10ma i out i max 3.0v v in - v out 40v - 0.2 5.0 a minimum load current v in - v out = 40v - 3.5 5.0 ma current limit v in - v out 15v 1.5 2.2 3.4 a temperature stability -55 c t j +125 c - 1.0 - % ripple rejection ratio v out = 10v, f = 120hz, c adj = 0 f v out = 10v, f = 120hz, c adj = 10 f 66 65 80 - db thermal regulation 20 ms pulse, t a = 25 - .03 0.07 %/w long term stability t j = +125 c, t = 1,000hrs - 0.3 1.0 % SHD519030
? 221 west industry court deer park, ny 11729 (631) 586 7600, fax (631) 242 9798 ? ? world wide web - www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron datasheet 1073 revision - mechanical dimensions in inches & mm lcc-3p pinout table type pin 1 pin 2 pin 3 lcc-3p, 1.5a regulator v out adjust v in SHD519030 disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns. .145 (3.68) .450 (11.43) .140 (3.56)typ. .035 (.89) min. .050 (1.27) .375 (9.53) .037 (.94) .625 (15.88) .415 (10.54) .157 (3.99) .030 (.76) min. 1 2 3
|
